Hendi 267240 Manual De Instrucciones página 9

scrapped. Do not remove the build-in battery yourself! Bring
the appliance to a qualified professional.
• The batteries is to be disposed of safely.
Charger safety instructions
• Protect the battery charger from rain and moisture.
• Do not use this charger to charge other batteries.
• Do not operate the charger on easily inflammable surface
(e.g. paper, textiles, etc.) or combustible surrounding.
• Operate the charger in a well-ventilated, dry, cool and clean
environment.
• Plug the charger within the listed voltage range on the charg-
er.
• Unplug the charger from the electrical outlet before attempt-
ing any maintenance or cleaning to reduce the risk of electric
shock.
• Disconnect charger from the power supply when not in use.
• Do not touch the uninsulated portion of output connector or
uninsulated battery terminal.
Charging the battery
• Use only the original charger. Only this charger is matched to
the Lithium-ion battery of the kebab slicer.
• The battery is supplied partially charged. To ensure full ca-
pacity of the battery, please completely charge the battery
before using the kebab slicer for the first time.
• Do not allow children to replace the battery pack or charging
the battery pack.
• The battery pack can be charged at any time without reducing
its service life. Interrupting the charging procedure does not
damage the battery.
• To remove the battery, press the battery release button and
pull out the battery. Do not exert any force.
• CAUTION! Danger of explosion if battery pack is incorrect-
ly replaced. Replace battery pack with the supplied battery
pack.
WARNING! Do not continue to press the on/off switch after the
machine has been automatically switched off. The battery pack
may be easily damaged.
Intended use
• This appliance is intended to be used for commercial applica-
tions, for example in kitchens of restaurants, canteens, hos-
pital and in commercial enterprises such as bakeries, butch-
eries, etc., but not for continuous mass production of food.
• The appliance is designed for cutting any type of grilled meat
in profession conditions. Any other use may lead to damage
to the appliance or personal injury.
• Operating the appliance for any other purpose shall be
deemed a misuse of the device. The user shall be solely liable
for improper use of the device.
Grounding installation
For item 267257, This appliance is classified as protection
class I and must be connected to a protective ground. Ground-
ing reduces the risk of electric shock by providing an escape
wire for the electric current.
This appliance is fitted with a power cord with grounding plug
or electrical connections with grounding wire. The connections
must be properly installed and grounded.
Main parts of the product
(Fig.1 on page 3)
1. Adjustment screw (for setting cutting thickness)
2. Knife protector
3. Switch
4. Fastening screw
5. Knife
6. Handle
7. Battery
8. Fastening screw
Remark: The content of this manual applies for all listed items
unless specified otherwise. The appearance may vary from the
shown illustrations.
Circuit diagram
(Fig.2 on page 4)
1. AC input
2. Control circuit board
3. Sensor
4. Motor
5. Adapter input
Exploded diagram with part list
267240 (Fig.3 on page 4)
Part
Part name
no.
1 Knife protector
2 Fastening screw
3 Smooth knife
4 Output axis
5 Oil seal
6 Bearing
7 Circlip
8
9 Adjustment screw
10 Gear box
11 Screw
12 Screw
13 Thread screw
14 Bearing
15 Seal ring
16 Pulley
17
18 Switch
19 Screw
20 Barrier chip
21 Lock screw
22 Motor
23 Screw
Quantity
1
1
1
1
1
1
2
Bolt 1
4
1
1
4
2
1
1
1
Belt 1
1
2
2
1
1
7
GB
9