Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information
Technical Data
Battery Data
Article Nr. Name
4211613002 Battery 14V Li-ion 14V, 2.5Ah,
Ambient Temperature
For best battery performance and life time, keep battery
within temperature intervals.
Operating temperature, charge
Operating temperature, discharge
Transportation temperature
Storage temperature
Do not place battery in direct sunlight.
Battery Charger Data
Battery charger
Battery charger operating
temperature
Other chargers not allowed. Charging the battery on a
not approved charger is considered as altering the system
and will make the tool certification invalid.
Declarations
EU DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB, SE-105 23
STOCKHOLM SWEDEN, declare under our sole responsi-
bility that the product (with name, type and serial number, see
front page) is in conformity with the following Directive(s):
2014/30/EU
Harmonized standards applied:
EN 55014-1:2017/A11:2020, EN 55014-2:2015, EN
61000-6-2:2005, EN 62133-2:2017
Authorities can request relevant technical information from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, SE-105 23 Stockholm Sweden
Stockholm, 1 December 2021
Carl von Schantz, Managing Director
Signature of issuer
4
Technical
Compatible
Type
Data
Tools
ICB-A21
35Wh
ITB-A31
+5 to +40 °C
(+41 to +104 °F)
0 to +40 °C
(+32 to +104 °F)
−20 to +40 °C
(−4 to +104 °F)
+10 to +25 °C
(+50 to +77 °F)
Flex charger, 4211608384
+5 to +40 °C
(+41 to +104 °F)
© Atlas Copco Industrial Technique AB - 9834 5550 00
Battery Directive
Information concerning Waste of Batteries:
This product and its information meet the re-
quirements of the Battery Directive (2006/66/
EC), and must be handled in compliance with
the directive.
Batteries are marked with a crossed-out wheeled
bin symbol without a single black bar under-
neath. The battery must be recycled either ac-
cording to local regulations or sent to your "Cus-
tomer Center" for handling.
Information regarding Article 33 in REACH
The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization and restriction of Chemicals
(REACH) defines among other things requirements related to
communication in the supply chain. The information require-
ment applies also to products containing so called Substances
of Very High Concern (the "Candidate List"). On 27 June
2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List.
In accordance with the above this is to inform you that certain
electrical components in the product may contain lead metal.
This is in compliance with current substance restriction legis-
lation and based on legit exemptions in the RoHS Directive
(2011/65/EU). Lead metal will not leak or mutate from the
product during normal use and the concentration of lead metal
in the complete product is well below the applicable threshold
limit. Please consider local requirements on the disposal of
lead at product end of life.
Conformity to North American Standards
5015332
UK DECLARATION OF CONFORMITY
We, Atlas Copco Industrial Technique AB,
SE-105 23 STOCKHOLM SWEDEN, declare
under our sole responsibility that the product
(with name, type and serial number, see front
page) is in conformity with the following UK
Regulation(s):
S.I. 2016/1091
Designated Standards applied:
EN 55014-1:2017/A11:2020, EN 55014-2:2015,
EN 61000-6-2:2005, EN 62133-2:2017
Authorities can request relevant technical information from:
Product Compliance Manager, Atlas Copco Industrial Tech-
nique AB, SE-105 23 Stockholm Sweden
Stockholm, 1 December 2021
Battery 14V
Listed
Conforms to Std. UL 62133
Certified to CSA Std C22.2
No. 62133
Publicidad
