Step 4
Remove the top cover and carefully add
water through a hole in top of panel
Step 5
Plug the transformer into main power
supply
Usage and Maintenance
● The remote control distance for this
product is 1.5 meters.
● Ensure the blue nozzles are inserted
properly in acrylic panel and connected with
Air-pipe from Air pump to avoid any water leak.
● Ensure the air-pipe is straight to avoid there is no bubbles coming out.
● The water inside the panel will continue to lose due to evaporation after one or two
months operating, which is dependent on a many variables such as climate, humidity,
temperature, etc. it is required to refill water timely
● It is recommended to clean the inside of your bubble wall every three month with mild
lotion and soft towel.
● The sensor of the controller should be out of the base when in use.
SAFETY INSTRUCTIONS!
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT IN SERIOUS
INJURY OR PROPERTY DAMAGE.
● Correct assembly and usage are essential for proper operation and avoid risk of injury.
● 2 people are required for assembly.
● If technical assistance is required, contact the vendor.
● Make sure the air pump and the sensor is dry all the time.
● This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be made by children
without supervision.
● The appliance is only to be used with the unit provided.
● The appliance is not intended to be used in water.
WARNING: Unplug or switch off all appliances in the aquarium or pond before carrying
out maintenance.
Most injuries are caused by misuse and/or failure to follow instructions.
Do not attempt to move the assembled unit once it's filled with water. Turn off the power
before moving the unit.
7