Sthor 78157 Manual De Instrucciones página 10

PRODUCT CHARACTERISTICS
A battery staple gun is designed for bonding textiles, leather, carton, paper, foil, insulation materials and other soft materials to wooden
or wood-based materials using metal staples. Thanks to efficient battery of high capacity it is possible to work with product wherever it
is not possible to work with staple guns with external power source. The product has not been designed for commercial applications.
Correct, reliable and safe operation of the product depends on proper operation, therefore:
Before starting the work with this product, please read this manual and keep it properly.
The supplier does not assume any liability for any damages resulting from misuse of the tool, failure to follow safety regulations and
recommendations specified in this manual. Misuse of the tool will also result in loss of guarantee and warranty rights of the user.
PRODUCT ACCESSORIES
The product is delivered complete and does not require assembly. The product is supplied together with charger. The product pack
does not include any staples.
TECHNICAL DATA
Parameter
Catalogue number
Operating voltage
Maximum capacity
Noise level
- acoustic pressure L ± K
pA pA
- acoustic power L ± K
wA wA
Protection class
Insulation class
Oscillation level a ± K
h
Weight
Type of fasteners
Dimensions of fasteners
Battery type
Battery capacity
Charger
Input voltage:
Mains frequency
Rated power
Input current:
Output voltage:
Output current:
Charging time
GENERAL SAFETY CONDITIONS
NOTE! Get acquainted with all the instructions below. Failure to observe them may lead to an electric shock, fire or injuries. The notion
of electric tool used in the instructions applies to all the tools which are powered with electric current, both wire tools and wireless
ones.
OBSERVE THE FOLLOWING INSTRUCTIONS
Place of work
The place of work must be properly illuminated and clean. Disorder and poor illumination may be a cause of accidents.
Do not work with electric tools in explosive environments, or those which contain inflammable liquids, gases or vapours.
Electric tools generate sparks, which may cause a fire in case of contact with inflammable gases or vapours.
Do not allow children and outsiders to the place of work. A lack of concentration may result in a loss of control over the tool.
Electric safety
The plug of the power supply cable must fit the mains socket. Do not modify the plug. Do not use any adapters whatsoever in
order to adapt the plug to the socket. Unmodified plug which fits the socket reduces the risk of an electric shock.
Avoid contact with grounded surfaces, such as pipes, heaters and refrigerators. Grounding of the body increases the risk of an
electric shock.
10
Measuring unit
O R I G I N A L
GB
[V d.c.]
[staple/min]
[dB]
[dB]
[m/s 2 ]
[kg]
[Ah]
[V~]
[Hz]
[W]
[A]
[V d.c.]
[A]
[h]
I N S T R U C T I O N S
Value
78157
3.6
30
80.73±3.0
91.73±3.0
IPX0
III.
2.628±1.5
0.8
staples
Fig. VI
Li-Ion
1.3
100-240
50/60
2.5
0.2
5
0.5
3-5