Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATIONS
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulley, camshaft or crankshaft. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. Packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with
the environment. Contact your local solid waste authority for recycling information. Dispose
of this product at the end of its working life environmentally.
USE
Camshaft alignment tool (1)
to be used as OEM EN-51415
Use this tool to lock the camshafts in their
distributing position before extracting the
transfer chain from the camshaft.
Make sure the tool contacts the cylinder
head cover sealing surface on the cylinder
head.
Chain tensioner locking pin (2),
to be used as OEM EN-51418
Insert the chain tensioner locking pin to
lock tensioner plunger. Push the plunger of
the chain tensioner up and insert the
locking pin.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Publicidad
