Blackstone 2147 Manual Del Propietário página 7

Model: 2147
With the help of another person, pick up the griddle body
STEP 03
and set it on its wheels�
Use one (1) shear pin [g.] and one (1) cotter pin
hook to the upper bar of the left leg assembly�
[f.] × 1
[g.] × 1
loosen the two (2) M6x12 screws on the right side of the
STEP 05
griddle body�
Hook one (1) side shelf on these screws and use two (2) M6x12
screws [b.] to secure the side shelf to the right side of the griddle
body� Tighten all four screws�
Repeat with the left side of the griddle body�
Make sure the front pins are fully [a.] × 4
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
BLACKSTONEPRODUCTS.COM/SUPPORT
STEP 04
place in the oFF position�
[f.] to attach the lPG
[a.]
STEP 06
griddle body�
With the help of another person, place the griddle top and hood on
the main body by aligning the 4 pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
the griddle top back to lock the
griddle in place�
ASSEMBLY GUIDE
Install the two (2) control knobs
× 2
Hang the grease cup in the slot at the back of the
| OWNER'S MANUAL
[a.] by pushing them into
07