Blackstone 1924 Manual Del Propietário página 7

Models: 1924 • 2252
Hang the grease cup in the slot at the back of the
STEP 06
griddle body�
With the help of another person, place the griddle top on the main
body by aligning the 4 pins to the holes of the body�
Make sure the front pins are fully
seated in the holes, then push
the griddle top forward to lock
the griddle in place�
Make sure the front pins are fully
seated in the holes, then push
Heavy pieces. Two people should assemble this appliance.
the griddle top back to lock the
griddle in place�
NOTICE
• DO NOT mix old and new batteries.
Place the two front pins into the
• DO NOT mix alkaline, standard (carbon-zinc) or rechargeable
front locking holes and push the
(ni-cad, ni-mh, etc.) batteries.
griddle top and hood back� Then,
set the two rear pins into the
Proceed to USING YOUR BLACKSTONE�
STEP 08
rear holes�
NEVER leave oil exposed in the rain. This can lead to severe
burns.
Place the included hardcover on the burner when not in use
or if it begins to rain.
Grease build-up on the Flame Tamper can catch fire when
heated.
To prevent damage to the unit and/or injury, clean the top of
the Flame Tamper after each use.
BLACKSTONEPRODUCTS.COM/SUPPORT
CAUTIoN
CAUTIoN
CAUTIoN
ASSEMBLY GUIDE
Use the four (4) M4x10 screws pre-installed in the hard cover
STEP 07
handles to attach the two (2) hard cover handles to the hard cover�
(Hang hard cover on back of griddle top during appliance use� Place
hard cover on the griddle top when appliance is not in use�)
NOTICE
Place appliance on a heat-resistant and flame-resistant
surface while in use.
NOTICE
DO NOT leave the hood closed for more than 10 minutes while
cooking.
NOTICE
• Maximum weight on the side shelf is 10 lbs (4.5 kg).
• The side shelf may get hot while appliance is in use.
NOTICE
DO NOT place items on stabilizing shelf during use.
Handle will get hot while appliance is in use.
DO NOT touch the handle while appliance is hot.
| OWNER'S MANUAL
CAUTIoN
07