Omer MIK1 Manual De Instrucciones página 11

8.0 Dive Mode -Precaution and Dive Mode
Dive Mode Precaution
If moisture is escalated around the water sensor, it may
activate the Dive Mode unintentionally. To prevent this
happen, dry the water sensor with a soft cloth when the
water sensor is wet.
If dirt is escalated around the water sensor, it may
obstruct the Watch to switch to Dive Mode automatically
when you are diving. To prevent this happen, clean the
water sensor with a soft cloth before starting a dive.
Dive Mode
The Dive Mode will be activated automatically if the user
submerges, and reaches the water level approximately
to 1.5 m (4.92 ft).
When the user emerges, and returns to the water level
approximately to 1.5 m (4.92 ft), the Normal Mode will
be resumed automatically.
When the Dive Mode appear, the following information
will be displayed:
1) the Current water depth,
2) the Current water temperature,
3) the Dive Status Indicator, and
4) the Elapsed Dive Time.
5) Current Time Display (Optional)
NOTE: Current Time Display will only appear if 'Current
Time Display in Dive Mode' is set ON in the Setting Display.
Please check for chapter 8.3 for more detail.