Omer MIK1 Manual De Instrucciones página 14

8.3 Dive Mode -Settings of Dive Mode
How to Set for the Dive Mode
Check for Chapter 4.1 of how to go into Setting Display.
In setting display, press the [M] button to bypass the
settings of current time until ' C' or ' F' is flashing .
During one of the settings is flashing (selected), press
the [U] or [D] button to change the setting.
When the 'Current Time Display in Dive Mode' is set
ON, the Watch will display the current time for 1 second
for every 4 seconds during Diving.
When the setting is completed, hold the [M] button for 2
seconds to exit the setting display. If there is NO key-
stroke for 1 minute, the Watch will also exit the setting
display automatically.