PAIRING OF THE DEVICES THAT ARE ALREADY IN A NETWORK -
ON THE TRANSMITTER DEVICE
1
STEP
ST
Click on PROG
(programming).
2
STEP
ND
According
to
button you wish to
pair, click A, B, C or
D to start PAIRING.
24
the
ONLINE
1.1 - The LED A
switches on, indi-
cating that you can
start the PAIRING.
2.1 - The LED A con-
tinues to blink and
all the devices in the
network blink as well.
Note: In the case of battery
powered devices (Ref. 40227),
the LED does not blink in order
to extend the battery's life.