FF Europe ELKESS-A-100L Manual De Instrucciones página 22

EN
Fixed screw nail
Water drainage position
0.8MPa
0.8MPa
Safety valve outlet
Water drainage spanner
Diagram 1 Diagram 2
THE OPERATING PROCEDURES
● Check all the piping connection for leakage before turning on the electric power of the
heater.
● Make sure that the tank is fully filled up with water, otherwise it will cause the heating
elements to be damaged.
● Turn on the mains electrical power supply and then adjust the temperature knob clock-
wise for higher temperature and anti-clockwise for lower temperature.
● The water heater needs to be turn on for a certain period of time to reach the accept-
able temperature.
● During the heating process, it's normal to see a slight drip at the safety valve. Please do
not cover up the safety valve outlet hole.
● Connect this outlet hole to a discarge pipe. Water may drip from the discharge pipe of
the safety valve, tehrefore this pipe must be exposed to the atmosphere.
● The safety valve is to be operated regularly (preferably at least every six months) to
remove lime deposit and to ensure that it is not blocked.
THE PRODUCT FEATURES
● Unique profile
● Sapphire golden silicon tank which is rust-proof, erosion-proof and with higher effiency
and having a longer life span.
● Energy saving with minimum heat loss. The water temperature is able to be maintained
up to 48 hours after the electricity is switched off.
● Rate power heating: 1500W.
22