Channel Scan; Time; Options; System - Sveon SPremiere Serie Manual De Usuario

LCN
LCN: This option enables or disables the LCN system (Local Channel Number).
The LCN is a number which identifies a channel. This option is used in some european countries like UK or France to make
easier the identification of channels.
Note: This option is enabled by default.
Sort
You can sort the channel list by LCN, ONID (Original Stream ID), Service-Name or ID service.
13.2 Channel scan
This menu allows you the setup of the following options:
13.3 Time
Select "Time" section to adjust the time parameters of the unit:
- Hourly compensation: Select Auto/Manual to enables the hourly compensation. When this option is enabled, the time is
updated from DVB-T signal.
- Country: Select the country where you are going to watch DVB-T signal.
- Time Zone: Setup the GMT manually.
Note: There are countries which have more than a GMT time. Spain uses GMT+1 (except Canary Islands, which uses
GMT).

13.4 Options

Select "Options" section to adjust the language and subtitles parameters:
- Subtitles language: Adjust the subtitles language.
- Audio language: Adjust the audio language.
- Digital audio: If you want to receive the audio signal in its original format select RAW option; to decode the audio signal
select PCM.

13.5 System

In this section you can adjust the Parental control option, password and default values of the device.
- Parental Control: Establishes the minimum age to ask for a password for a channel watching. The default password is:
"000000".
- Password: This optoin allows you to change the password. To enable the password change use the numeric pad <0-9>
to enter the old password; you have to enter twice the new one.
- Default values: Restore the default setup (all the changes will be deleted).
- Information: Press to check the device software version.
- Auto channel scan: Select to start an auto channel scan.
- Manual scan: Allows the channel scan by frequencies.
- Country: Select the country where you want to watch DVB-
T channels.
Note: The Manual scan function doesn´t search the chan-
nels automatically. The user must enter the frequency of the
channels he want to watch. When a new channel scan is
made in a frequency band, all the channels previously saved
of this band will be deleted and replaced for the new scan re-
sults.
SPM1200HD User Guide
Index
1. Welcome
1.1 Safety instructions
2. Features
3. System Requirements
4. Content
5. Hardware
6. Remote control
6.1 Batteries installation
7. PC Connection
8. TV Connections
8.1 AV Connection
8.2 HDMI Connection
8.3 Antenna Connection
9. First time usage
9.1 Hard disk formatting
9.2 Main screen
10. Setup Menu
10.1 System
10.2 Film
10.3 Pictures
10.4 Format
11. Basic operations
11.1 Pictures playback
11.2 Music playback
11.3 Video playback
11.4 Explore
11.5 DVB-T
11.6 Recording

12. Channel Scan

12.1 Auto channel scan
12.2 Manual channel scan
13. TV Main Menu
13.1 Program Menu
13.2 Channel scan

13.3 Time

13.4 Options
13.5 System
13.6 Recording menu
14. Sort channels
14.1 Skip channels
14.2 Lock channels
14.3 Delete channels
14.4 Favourite list
14.5 Rename
15. Shedule and direct recording
16. TimeShift recording
17. Radio
18. Watching TV channels
19. Info
20. Teletext
21. Multimedia
22. Default Setup
23. Upgrade System
24. Warning
APPENDIX: Files information
English 35