Parkside Performance PWSAP 40-Li A1 Traduccion Del Manual De Instrucciones Originale página 20

To avoid potential risks, a dam-
■
aged mains cable should be
replaced by the manufacturer
or the manufacturer's customer
service department or a similarly
qualified person.
The charger is suitable for indoor use only.
WARNING!
■ To avoid potential risks, a damaged mains
cable should be replaced by the manufacturer
or the manufacturer's customer service
department or a similarly qualified person.
Permissible accessories
Cutting disc
Roughing disc
PWSAP 40-Li A1
230 3 M14
230 8 M14
CAUTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
♦ A current list of battery compatibility can be
found at www.Lidl.de/Akku.
Storage and handling of the
recommended accessory tools
■ Grinding tools must be treated with care and
transported carefully.
■ Grinding tools should be stored in such a way
that they are not exposed to mechanical dam-
age or environmental influences (e.g. damp).
≥ 6000 ≥ 73
≥ 6000 ≥ 73
Two-hole mounting
spanner 7
Two-hole mounting
spanner 7
GB │ IE │
Yes
Yes
9 ■