Parkside Performance PWSAP 40-Li A1 Traduccion Del Manual De Instrucciones Originale página 24

♦ Lock the mounting spindle z.
♦ Tighten the clamping nut o clockwise using the
two-hole assembly spanner 7.
NOTE
► If the disc does not turn smoothly or vibrates
after the change, the disc must be replaced
immediately.
♦ For safety's sake, run the appliance at maximum
speed for 60 seconds after every disc change.
Be aware of unusual noises and sparks.
♦ Check whether all fastening elements are
correctly fitted.
♦ Make sure that the arrow showing the direction
of rotation (if any) on the cutting or rough grind-
ing discs (including diamond cutting discs) and
the direction of rotation of the appliance (arrow
showing the direction of rotation on the head)
match.
Using the appliance
Switching on/off
Check the attached tool before use to ensure that
all fastening elements are correctly fitted.
NOTE
► Always switch on the angle grinder before
making contact with the material, then apply
it to the workpiece.
► If the appliance blocks due to an overload
(the overload LED 6 lights up) and switches
off, it will restart automatically as soon as the
cause of the blockage is removed (auto-start
function).
Switching on
♦ Press the safety lock-out 1.
♦ Then press the ON/OFF switch 2.
Switching off
♦ Let go of the ON/OFF switch 2.
PWSAP 40-Li A1
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the batteries before carrying out any
work on the appliance.
The cordless angle grinder is maintenance-free.
■
Do not use any sharp objects for cleaning the
appliance. Do not allow any liquids to get
into the appliance. Otherwise the appliance
could be damaged.
■ Clean the appliance regularly, preferably imme-
diately after use.
■ Clean the housing with a dry cloth – do not use
petrol, solvents or cleaners which can attack the
plastic.
■ A vacuum cleaner is required for thorough
cleaning of the appliance.
■ Ventilation openings must never be obstructed.
■ Remove any sanding dust stuck to the appliance
with a brush.
NOTE
► Replacement parts not listed (such as switches)
can be ordered via our Service Hotline.
WARNING!
■ Do not use any accessories that are not
recommended by PARKSIDE. This can lead to
an electric shock and fire.
GB │ IE │ 13 ■