Young Living 42079 Manual De Operación página 36

Cleaning and Maintenance
Always turn off and unplug the diffuser prior to cleaning. To ensure proper
performance, clean the ultrasonic plate and lid after each use. If essential oil
begins to build up on the ultrasonic plate, gently wipe it off using a cotton swab
dipped in rubbing alcohol. If essential oil begins to build up on the lid, gently
wipe it clean using only mild soap and water. Never use corrosive detergents to
clean the ultrasonic plate, or damage will occur. Periodically check under the
diffuser to keep the fan intake free of debris. Debris can be removed by blowing
on the fan intake opening or wiping with a clean, dry cloth. Do not use aerosol
sprays, solvents, or abrasives to clean the plastic housing. When not in use,
clean the diffuser and store dry.
Troubleshooting
Issue: When switched on, the diffuser does not operate.
Potential causes: power connection issue, water above water fill line marker
•
Check that the adapter is securely plugged into the wall socket and the
bottom of the diffuser.
•
Confirm that there is water in the reservoir and that it does not go above
the fill line marker. If there is too much water, unplug the unit and adjust
the water level, then restart. The light should come on, and the diffuser
should mist.
Issue: There is no mist or less mist than usual.
Potential causes: water above fill line, oil buildup on ultrasonic plate,
ultrasonic plate has stopped working, fan vents or mist spouts are obstructed,
fan is not working
X
36