Guardian 42134 Manual De Instrucciones página 2

English
Important Notes
Tape measure sleeve attachments are

suitable only for tape measures weighing
less than 0.91 kg (2 lbs) and tool tethers
with a length of 152 cm (5 ft) or less.
This product is intended for use

by personnel who are trained
and knowledgeable regarding
working with hand tools at height
and/or near machinery.
Ensure the tape measure is large enough

that it cannot slip out of the tape sleeve
and that it is fully intact to support the
tool in its entirety in the event of a drop.
Inspect before each use for

damage and proper function:
1. Check all hardware for abrasion,
deformity, cuts and sharp edges.
2. Check for tears, cuts, fraying, abrasion,
discoloration, burns, holes, mold,
unsplicing, pulled or broken stitches,
or other signs of wear or damage.
3. Do not use and always quarantine if
any of the above apply or if damaged
or not functioning correctly.
Safety Information
 WARNING! Do not use near
moving parts, mechanisms, running
machinery or rotating equipment.
May contain electrically

conductive materials.
Do not alter product in any way

from its original state.
Applicable Safety Standards
Meets or exceeds:
ANSI / ISEA 121-2018

2