Publicidad
Idiomas disponibles
Idiomas disponibles
Bagger Usage
NOTE: When all of the grass bags are full, place the tractor on a firm, level surface, disengage
the PTO, turn the tractor engine off and set the parking brake.
1.
Pivot the seat forward and up.
2.
Lift up bagger cover by pushing in on the rear, right-side tab with your right hand (1),
as seen in of Figure 26, and lifting the cover with your left hand in the center rear of
the bagger cover (2).
2
3.
Do not remove the hose from the tractor.
1
Figure 26
OPERATION
4.
Remove the grass bags, as shown in Figure 27, by lifting each bag up (1) and moving
the bags away from the bag support assembly (2).
5.
Empty the grass clippings at a proper disposal sight, use the handle at the bottom of
each grass bag. Holding the bag firmly, empty the contents.
6.
Replace the grass bags in the reverse order and in the same orientation in which they
were removed, close lid, pivot down the seat, restart your tractor and resume cutting
your grass.
10
2
1
Figure 27
Publicidad
