Ruby VCI 800 Manual De Instrucciones página 16

INSTRUCTION MANUAL
24. Keep cord away from sharp or hot objects.
25. Thoroughly dean the unit before first time use.
26. Do not clan with metal sourcing pads. It may scratch the surface or cause electrical shock.
27. Do not dean the unit with flammable liquid.
28. Avoid shadng a power outlet with any other appliances.
29. Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to OFF,
then remove plug from wall outlet.
30. Do not use new and old batteries at the same time in remote controller.
31. Take off batteries from remote controller when not in use.
MAINTENANCE AND CLEANING
Note: After long time operation, the filtration mesh becomes clogged with dust and dirt, which will
greatly affect the unit's performance. It is recommended to clean the filtration mesh frequently.
Cleaning the filtration mesh
1.Remove plug from wall outlet.
2.Catch the filtration mesh handle and pulí upwards.(shown as fig.4)
3.Clean filtration mesh with mild detergent and soft brush.
4.Make sure filtration mesh is completely dry before installing.
Cleaning the water tank
1.Remove plug from wall outlet.
2.Pull out the water tank.(shown as fig.5)
3.Clean the water tank with a little mild detergent on a towel and then rinse in water.
4.Put the water tank in place after cleaning.
Cleaning the body
Clean the body with a little mild detergent on a soft cloth.
Note: • Unplug from outlet before cleaning.
• No water on the control panel.
fig. 4 fig. 5
14
RUBY VCI 800