Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting and disconnecting the gas bottle
Parts and tools needed
excluded
The hose shall be approved according to EN16436 with
sufficient length, allowing installation without any kinks
(Length shall not exceed 1.5m). The hose shall be readily visible
across its entire length for inspection after installation.
Gas regulator should be approved according to EN 16129:2013
with proper capacity (g/h), pressure, working temperature and
inlet + outlet connection for the country of destination.
DANGER! IGNITION OF ESCAPING GAS
Possible consequences:
Safety measures:
(sparkover possible).
Operational Elements:
lever/
9 o,clock setting or rotate clockwise to the end:
Cylinder valve
12 o,clock setting or rotate anti-clockwise to the end:
than
Function
rotate to the end
Note
cylinder
1-A
G5
20
G1
G2
12
G3
G4
1/4 position
1/4 to 1/2.
G1
G2
9
G4
G2
G4
setting or anti-clockwise
opened
1-B
G2
G4
Publicidad
