Garmin EDGE 1040 Guia De Inicio Rapido página 11

surrounding area before charging or
connecting to a computer.
The device is powered by a built-in
lithium-ion battery that you can charge
using a standard wall outlet or a USB port
on your computer.
NOTE: The device will not charge when
outside the approved temperature range
(page 11).
1 Pull up the weather cap
USB port .
2 Plug the small end of the USB cable
into the USB port on the device.
3 Plug the large end of the USB cable
into an AC adapter or a computer USB
port.
4 Plug the AC adapter into a standard
wall outlet.
Quick Start Manual
When you connect the device to a
power source, the device turns on.
5 Charge the device completely.
After you charge the device, close the
weather cap.
Tips for Using the Edge 1040 Solar
Device
• When you are not using the device,
point the display toward sunlight to
from the
extend the battery life.
• Solar charging occurs even when the
device is in sleep mode or turned off.
Specifications
Edge operating temperature range: From
-20º to 60ºC (from -4º to 140ºF)
Edge charging temperature range: From
0º to 45ºC (from 32º to 113ºF)
Speed sensor and cadence sensor
operating temperature range: From
-20º to 60ºC (from -4º to 140ºF)
Heart rate monitor operating
temperature range: From -5° to 50°C
(from 23° to 122°F)
11