Garmin EDGE 1040 Guia De Inicio Rapido página 3

NOTE: Go to www.buy.garmin.com to
purchase optional accessories.
Pairing Your Phone
To use the connected features of the
Edge device, it must be paired directly
through the Garmin Connect
of from the Bluetooth settings on your
®
phone.
1 From the app store on your phone,
install and open the Garmin Connect
app.
2 Hold to turn on the device.
The first time you turn on the device,
you will select the device language.
The next screen prompts you to pair
with your phone.
3 Follow the instructions in the app to
complete the pairing and setup
process.
NOTE: Based on your Garmin Connect
account and accessories, your device
suggests activity profiles and data
fields during setup. If you have
sensors paired with your previous
device, you can transfer them during
setup.
NOTE: Setting up Wi‑Fi
mode usage on your device enables
the device to sync with all your data
Quick Start Manual
such as training stats, course
downloads, and software updates.
After you pair successfully, a message
appears, and your device syncs
automatically with your phone.
app, instead
™
Installing the Standard Mount
For the best GPS reception, position the
bike mount so the front of the device is
oriented toward the sky. You can install
the bike mount on the stem or the
handlebars.
1 Select a secure location to mount the
device where it does not interfere with
the safe operation of your bike.
2 Place the rubber disk
of the bike mount.
Two rubber disks are included, and
you can select the disk that best fits
your bike. The rubber tabs align with
the back of the bike mount so it stays
in place.
and sleep
®
on the back
3