Pur Line ZAFIR V2000T LUX Manual De Usuario página 17

• Connect to power supply, push the ON/OFF (O/I) button to switch on the left side of the appliance. Buzzer will
have a short "D" sound and full screen display will light up for 10 seconds.
Push ON/OFF button again to switch off.
• Press to turn on the heating function.
Note: Button light will go out in 10s if the appliance is not operated. Touch any button to reactivate the button
light.
• Press again to turn off the heating function and put the appliance in standby mode.
Note: The motor will continue to run for a further 15 seconds to remove residual heat from inside the appliance
before switching off.
SET DATE AND TIME:
• The first time the device is used, the icon
• Press and hold the timer button for 3 seconds, the 1 day icon "d1~ d7" flashes (d1=Monday to d7=Sunday).
Use and to select the day. Press Timer button to confirm.
• After confirming the day of the week, the hour digits flash, use
confirm selection with Timer button. Then the minut digits flash, select the current minutes and confirm with
Timer button.
• The display shows he current day of the week and time.
POWER SETTING:
Function
High heating level
Low heating level
Towel heating function
High heating level + Towel
heating function
on the display flashes to remind to set the local day and time.
Power
1800W
1100W
200W
1800W + 200W = 2000W
15
and to set the current hour and
Display symbol