kqueo K-LIFT SBASE Instrucciones De Montaje página 35

STEP N°7: FIXING THE CONTROL BOX AND THE CONTROL PANEL
UNDER THE TRAY
PREPARATION
7.1 Position the control box on the 2 pre-drilled holes at the back of the tray, and
fix it with 2 screws (C)
7.2 Position the control panel on the 4 pre-drilled holes on the right or left side
of the front of the tray. Fix the control panel using 4 screws (D)
7.3 Use the remaining screws (C) to secure the mounting clips (E) so that the
cables do not hang down and are not visible.
14