• The device must be cleaned regularly using clean or slightly soapy water. Do not use any solvents.
• Rinse the device generously using clean water.
• Never store the cleaner in direct sunlight. Store the hoses laying flat and not coiled to prevent unwanted hose memory.
4.1 I Cleaning the filtration pump basket
• Always remove the cleaner from the pool before cleaning or bleeding the filtration system.
• Before cleaning (and before you put the cleaner back into the water), start the filtration pump
for at least 5 minutes before you bleed the circuit.
• For maximum cleaner performance it is recommended the filtration pump basket be kept clean by removing debris
as needed.
• Use of the Cyclonic
collect large debris before it reaches the skimmer and the pump basket.
4.2 I Cleaning the "Cyclonic
• Turn off the filtration pump.
TM
• Keep the Cyclonic
transparent canister until it detaches (see image
• Remove the transparent canister from the water and leave the lid and the hoses under the water (see image
• Remove the filter using the top handle (see image
• Remove the debris and rinse the transparent canister in clean water (see image
• Put the filter back in place and immerse the Cyclonic
• Position the transparent canister correctly on the lid notches then turn it sharply to push the 2 parts in (see image
11
❹ Maintenance
Leaf Catcher (accessory included or optional depending on the model) is recommended to
TM
" Leaf Catcher
TM
Leaf Catcher under the water and take hold of it by the handle. Using the handle, turn the
).
).
Leaf Catcher again (see image
TM
).
).
).
).