Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING METAL SELF- SUPPORTING GREASE FIL-
Alarm signal reset
• Switch off the lights and extractor motor.
• Press button T3 for at least 3 seconds, until the leds
start to flash.
Cleaning the filters
• The filters are washable and must be cleaned at least
every 2 months of operation, or more frequently for
particularly heavy usage.
• Pull the Comfort Panel to open it.
• Remove the filters one at a time by pushing them to-
wards the back of the group and pulling down at the
same time.
• Wash the filters, taking care not to bend them. Allow
them to dry before refitting.
• When refitting the filters, make sure that the handle
is visible on the outside.
ATTENTION: Remove the filters one by one pushing
them towards the back side of the hood and simultane-
ously pulling downwards and towards the centre of the
hood (only in case of 60 cm hood version).
EN
Grease filters
TERS
2
27
7
Publicidad
