Hendi 261309 Manual De Instrucciones página 7

Operation
• Make sure the heating control knob is switched
to the 0 position.
• Connect the power plug to a suitable electrical
power outlet.
• Power ON the appliance by turning the Heating
control knob to the desired setting (Full power/
Low power/Upper heating only). The power indi-
cator will be light up in green.
• Place the sliced bread on the conveyor by using a
tong (not supplied) to avoid danger of heat burn.
Ensure the bread is evenly placed.
• Rotate the Speed control knob to adjust the
speed of the conveyor & thus the browning even-
ness of the toasted bread.
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely before
cleaning and storage.
• Clean the appliance regularly and any food resi-
dues removed.
• CAUTION! Never use any abrasive or hard objects
for cleaning.
• Clean the appliance with luke-warm water and
a soft cloth.
Parts How to clean
All accessories - Soak in warm, soapy water for about 10 to 20 minutes.
such as trays, etc. - Rinse under running water thoroughly.
External surfaces - Wipe clean with a soft cloth and a little mild detergent.
Storage
• Always make sure the appliance has already
been disconnected from the electrical power out-
let and cool down completely.
Make sure no water or moisture enters inside the of the
appliance.
• When not in use, set the Heating control knob to
the "0" position.
• Unplug the appliance from the electrical power
outlet.
• Allow the appliance to cool down completely be-
fore cleaning or storage.
Note: Due to manufacturing residues, the appli-
ance may emit a slight odor. This is normal and
does not indicate any defect or hazard. Make sure
the appliance is well ventilated.
• Do not use water jet or steam cleaner for clean-
ing and do not push under the water.
• No any parts can be cleaned in the dishwasher.
• Store the appliance in a cool, clean place.
Remark
Dry all parts well at
last.
7
EN