Publicidad
STEP 2A Attach Wall Plate
CAUTION:
Avoid potential personal injury or property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)
●
Minimum spacing between studs: 16 in. (406mm)
●
Stud center must be verified
1
Max.
5/8 in. (16 mm)
(406 mm)
3
07
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 3 ½ in. (9 cm), using a 7/32
in. (5.5 mm) diameter drill bit.
6
Min.
16 in.
3 ½ in. (9 cm)
7/32 in.
(5.5 mm)
Wood Stud Installation
2
4
09
08
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
Tighten the lag bolts
09
wall plate
.
08
DO NOT over-tighten the lag bolts
Go to STEP 3 on PAGE 8.
only until they are pulled FIRMLY against the
.
09
07
09
.
Publicidad
