23. RANDOM BUTTON
When this button is pressed, "RDM" indication is displayed and each track of the disc is played in
random instead of normal progression. To cancel RANDOM mode, press 'RDM' button again.
24, 25. FOLDER DOWN/UP (In case of MP3/WMA files)
M5: Folder down / M6: Folder up
HOW TO SELECT MP3/WMA FILES
Searching by Track:
•
Press "AS/PS", then search track is activated.
•
Turn "VOL" knob to left or right, select first digit desired.
•
Press "VOL" knob, then the first digit is fixed and second digit will flash.
•
Turn "VOL" knob to left or right, select 2'nd 3'rd respectively.
•
Press "BD/ENT", the song selected will start.
Searching by Character:
•
Press "AS/PS" twice, then character search mode is activated.
•
Turn "VOL" knob to left or right, you can select the desired letter.
•
Press "VOL" knob, repeat steps above for 2'nd 3'rd character.
•
The songs with the same character that you selected is displayed.
•
Turn "VOL" knob to left or right, you can select the desired song.
•
Press "BD/ENT", then the song selected will start.
Searching by File Name:
•
Press "AS/PS" 3 times, then folder search is activated.
•
Turn "VOL" knob to left or right, you can select the desired folder.
•
Press "BD/ENT", then the folder is fixed and the first file will be played.
26,27. USB/ SD/MMC MEMORY CARD
The device is equipped with a USB interface and a memory card reader for SD/MMC cards. MP3
or WMA files stored on these media can be played.
1. Plug your USB storage medium into the USB port.
2. If you use a memory card, insert it into the memory card reader.
3. The player automatically switches to the input used and starts playback.
4. See the section on operations common for audio files on how to control USB or memory card
playback.
Note:
• Due to the great variety of devices with USB and SD/MMC card interfaces that sometimes have
manufacturer-specific functions, we cannot guarantee that all media will be recognized and that
all operational functions will be available with this device.
• You cannot operate USB hard drives on the device.
28. FRONT AUX IN
An external audio source (e.g. portable MP3 player) can be connected to the AUX IN socket to
be played back by the vehicle loudspeakers. Press the MODE button to select the AUX IN mode.
• Connect the AUX IN socket with the audio output of the external device.
29. RESET
Reset button is placed on the housing.
The reset button is to be activated for the following reason:
•
Initial installation of the unit when all wiring is completed.
•
All the function button do not operate.
•
Error symbol on the display.
30. POWER INDICATOR LED
Flash LED when ignition is switched on.
EN-8
1
8
14 32 2
3
11
12
19
18
RESET
29
6 33
5
7
13
10
20
2
30