Descargar Imprimir esta página

ZWHEEL T4 Serie Manual Del Usuario página 47

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 1
detecting any failure during charging, disconnect the charger. Avoid
contact with metal or other wires.
 When you unplug the charger, be sure to do so by the outlet and not
by pulling on the cord. Avoid exposing charging components to hot
surfaces or sharp objects. Frequent visual inspection of both the
charger and cables is recommended.
 Be sure to turn off the vehicle while charging or in a certain non-
operational mode.
 In case the charger or cables have visible damage, do not use them and
replace them with original components.
 The external temperature could affect the performance and travel of
the scooter.
 Under no circumstances should the battery, charger and/or cables be
repaired. If you have a problem with these components, call Technical
Service.
If the battery does not fully charge while in charge mode for ten
(10) hours or more, it is recommended to call for service,
NOTE
especially if the battery begins to heat up or has some other
malfunction/failure.
Motor
 The scooter has a modern, powerful and efficient brushless electric
motor with low speed and high power. If you use the scooter wisely,
you will get more range.
 The motor of the scooter does not require maintenance, as long as it is
used under normal and prudent conditions.
 If the scooter's motor detects a very heavy load on the way up, it will
cut out and you will have to restart the scooter. The purpose of this
mechanism is to prevent permanent damage to the motor or electronic
controller.
 Make sure the battery has enough charge.
18

Publicidad

loading

Este manual también es adecuado para:

T4 zrinoZ1t40522b1a060bb1b