Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING:
Strictly adhere to all torque wrench tightening specifica-
tions. Failure to do so could cause serious personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the start key from the tool
when you are assembling parts.
INSTALL THE SEAT
See Figure1.
Place the seat assembly over the mounting brackets and
align as shown.
Lower the seat clip so it is secured onto the mounting-
bracket.
SEAT
CLIP
MOUNTING
BRACKET
ASSEMBLY
SEAT
ASSEMBLY
PLUG
SAFETY
INTERLOCK
CABLE
Fig. 1
6 — English
Attach the seat safety interlock cable to the plug on the
mower.
Lower the seat.
CONNECT THE BATTERY
See Figure 2.
When shipped from the factory, the mower's batteries are
disconnected.
To connect:
Pull up on latch to lift tractor hood.
Remove the storage tray.
Install the battery pack's quick-connect plug.
Repeat for each battery pack.
Replace the storage tray and lower the tractor hood. Make
sure the hood is securely latched.
BATTERY
COMPARTMENT
COVER
TABS
QUICK-CONNECT
PORT
BATTERY QUICK-
CONNECT PLUGS
Fig. 2
Publicidad
