Publicidad
Idiomas disponibles
Idiomas disponibles
1
4
6
CLEANING
WARNING: VERIFY THAT THE POWER PLUG IS DISCONNECTED FROM THE SOCKET.
Regularly clean the filter. The filter is re-usable and should be cleaned regularly.
NOTICE: Clean or change the filter regularly for best performance. If the machine is used without the
filter, the motor will burn out and the warranty will be voided. Always keep spare filters on hand.
NOTICE: The filters included are made of high-quality materials designed to stop small dust particles.
A dry filter is necessary to pick up dust. If the filter is wet, it will clog quickly and be very difficult to
clean. Handle the filter carefully when removing it for cleaning and replacing it. Check the filters for
tears or small holes. A small hole can let dust pass through and out of the filter. Do not use a filter with
holes or tears; replace it immediately.
1. Verify that the plug is disconnected from the power outlet.
2. Press the release button and remove the container (Fig. 1).
3. Remove the filter and filter holder from the container, then clean any loose dust off the filter (Fig. 2).
4. Empty all debris and any dust from the container (Fig. 3).
5. Use a mild soap and water solution to wash the filter and rinse with clean water (Fig. 4).
6. Allow the wet filter to air dry for 24 hours before fitting into the container. For optimal performance,
a new filter is recommended.
7. Make sure the container and filter are clean and dry before using it again. DO NOT immerse the
vacuum in water (Fig. 5).
8. Refit the filter and filter holder into the container (Fig. 6).
9. Refit the container onto the vacuum. Make sure the container clicks into place (Fig. 7).
MAINTENANCE
2
5
7
9
3
Publicidad
