Chapter 5: Doorway Width Of The Base; Chapter 6: Checking, Servicing, Maintenance And Dismantling - TUBESCA-COMABI STARTEO Instrucciones De Montaje

STARTEO

Chapter 5: Doorway width of the base

1755 mm HT
850 mm HT

Chapter 6: Checking, servicing, maintenance and dismantling

• After each job, be sure to clean the mobile tower with a clean cloth.
Inspect the parts before each assembly and especially:
- wheel tyres and brakes.
- Safety devices.
- The platform hooks and their fixings.
- The work platform plywood.
- the stabilizer clamps.
All parts that have undergone:
- Permanent deformation.
- Drilling.
- Notches (e.g. by grinding, etc.)
- Strong oxidation
... is discouraged!
In case of doubt, exchange the component.
When exchanging components, an original part must imperatively be used.
Keep parts clean and safety devices in good working order.
Replace or clean any signs or stickers that give operating and safety instructions.
37