cecotec CONGA POPSTAR 14800 AQUA Manual De Instrucciones página 36

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1.
1. On/Off button
2. Water spray button
3. Small brush
4. Adaptor
5. Upper cover floor brush lock
6. Rotary brush
7. Handle
8. Battery pack
9. Water tank
10. Sewage tank
11. Floor brush
12. Machine holder
2. BEFORE USE
Take the product out of the box.
Check for any visible damage, if any is observed, contact as soon as possible the Technical
Support Service of Cecotec for advice or reparation.
3. PRODUCT INSTALLATION
Installation of handle assembly and body assembly
Take out the machine parts from the package.
Connect the wiring terminals on the handle assembly with the wiring terminals on the body
assembly.
Put the cable into the groove.
Align the metal nozzle of the handle with the connecting rod on the body and insert it to the
bottom until it can no longer be inserted.
Use the screws provided in the package to fix the handle and the body at the screw hole
position.
Notes
When taking out the machine, do not lift the machine by pulling the wires in the middle to avoid
36
CONGA POPSTAR 14800 AQUA