Descargar Imprimir esta página

VigorPool LAKE 300 VP11 Manual Del Usuario página 10

Publicidad

Icon Light Up
Icon Light Up
Icons Flash together
Icon Flash
Icon Flash
If you are still having problems, please feel free to contact us at support@vigorpool.com.
For additional information, check our o cial website:
5. Frequently Asked Questions
1. What devices can VIGORPOOL Lake 300 power?
A: VIGORPOOL Lake 300 can power essential devices that require less than 300-Watts or multiple devices with a combined output
under 300 watts. Please refer to the specification of appliances you wish to run before purchase.
2. What is the VIGORPOOL Lake 300 power station lifespan?
A: The VIGORPOOL Lake 300 uses Lithium iron phosphate battery technology. After 2000 charge cycles, the VIGORPOOL Lake
300 power station should retain around 80% of its initial capacity. Lifespan also depends on use, maintenance, etc.
3. Is the VIGORPOOL Lake 300 waterproof?
A: The VIGORPOOL Lake 300 is not waterproof, please stay away from water sources.
4. Can I use and charge my VIGORPOOL Lake 300 at the same time?
A: Yes, all of our products support pass-through charging. But we don't suggest using it this way very frequently as it will reduce
the battery life.
5. Can I take my VIGORPOOL Lake 300 on a plane?
A: Unfortunately, you cannot. According to FAA regulations, any battery that you take on board should not exceed 100Wh.
External chargers or power banks are also considered to be a battery, and should not surpass a capacity of 27000mAh, or in
other words, 100Wh.
7
High-Temperature
Protection
Low-Temperature
Protection
USB-A Output
Overload Protection
or Short Circuit
Charger Overload
Protection
Wireless Exception
VIGORPOOL.COM.
The power supply will resume normal
function automatically after the battery
cools down.
The power supply will restore normal
function after the battery temperature
returns to normal.
Remove the abnormal load. After 10
seconds, the power station should
function as usual.
Remove the abnormal load. After 10
seconds, the power station should
function as usual.
Remove the abnormal load. After 10
seconds, the power station should
function as usual.
E05
E06
E07
E08
E14

Publicidad

loading

Productos relacionados para VigorPool LAKE 300 VP11