allen+roth 1975FM-23-349 Instrucciones De Montaje página 19

ASSEMBLY INSTRUCTIONS (CONTINUED)
22. Slot in the USB cable from the heater through
the hole at the bottom of the fireplace brick
wall (T). Plug the USB cable into the USB port
behind the fireplace grate (N). Now first slot in
the fireplace brick wall into the groove on the
right middle wall (F). Once it is in, align the
other end of the fireplace brick wall to the
groove on the left middle wall (E) and slot it in.
Finally push the fireplace brick wall downwards
into the groove on the base panel (V).
Note: that the fireplace brick wall is reversible
with either bricks pattern or black.
WARNING: You must install the tip restraint
hardware to help prevent any accidents or
damage to the unit. We strongly recommend
attaching the tip restraint hardware to a wall stud
and your unit. For all other wall types, please visit
your local hardware store to obtain the proper
hardware.
Assembly is now complete. With the help of
another person, move the unit to the final desired
position. Once in the final position, you may attach
the tip restraint hardware to the wall. You may now
plug the heater into the power outlet.
Hardware Used
Tip Restraint
GG
Hardware
22
x 2
19
F
T
USB
A
2
1
E
USB
GG