Publicidad
Idiomas disponibles
Idiomas disponibles
e)
Keep the product in good working order. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
f)
Keep the product out of the reach of children.
g)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
h)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
i)
When transporting or moving the device from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the device is used.
j)
Avoid situations in which the device stops under heavy loads during operation.
This can cause overheating of the drive elements and consequent damage to
the equipment.
k)
Do not touch any moving parts or accessories unless the device is unplugged.
l)
Clean the device regularly to prevent permanent dirt build-up.
m) The product is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
n)
Do not tamper with the device to alter its performance or design.
o)
Keep the unit away from sources of fire and heat.
p)
Do not block the ventilation openings of the unit!
q)
It is forbidden to use the device for carrying loads exceeding its maximum load.
r)
Do not allow people or animals to stand under suspended loads.
s)
Transporting the load by means of the unit over people or animals is
prohibited.
t)
Transporting people or animals by means of this unit is prohibited.
u)
When transporting with the unit, avoid shocks, impacts and sudden changes in
speed. This will reduce the risk of the load falling from a height.
v)
Before suspending the load, always ensure that the space in which it will be
transported is clear of obstructions.
w)
Bystanders should be warned of the operation of the equipment and should
stay at a safe distance from the load.
x)
Always pay close attention to the load.
y)
Do not leave suspended loads unattended.
z)
Avoid rocking the load.
aa) Do not perform mechanical or similar work (welding, cutting, etc.) on
suspended loads.
bb) Make sure that the load is stable and properly secured on the load ring.
cc) If the load falls, there is a risk of injury or death.
dd) Do not walk or stand under suspended loads (or in their immediate vicinity).
Publicidad
