Publicidad
Idiomas disponibles
Idiomas disponibles
SIGNAL TRANSMISSION BY RADIO (e.g. W-DMX or audio radio systems, Bluetooth):
The quality and performance of wireless signal transmissions generally depends on the
ambient conditions.
The following factors can impact range and signal stability, for example:
• Shielding (e.g. masonry, metal structures, water)
• High volume of radio traffic (e.g. powerful wireless LAN networks)
• Interference
• Electromagnetic radiation (e.g. LED video screens, dimmers)
All range specifications refer to free-field application with visual contact
and without interference!
The operation of transmission systems is subject to official regulations.
These can vary from region to region and must be checked by the operator
before commissioning (e.g. radio frequency and transmission power).
WARNING:
Devices with wireless signal transmission are not suitable for use in sensitive areas
in which radio operation can lead to potential detrimental effects. These include:
• Hospitals, health centres or other healthcare facilities that provide patient
treatment with skilled personnel and equipment.
• Hazardous areas Class I, II and III
• Restricted areas
• Military facilities
• Aircraft or vehicles
• Areas where the use of mobile phones is prohibited
INSTRUCTIONS FOR INDOOR INSTALLATION EQUIPMENT
1. Units for installation applications are designed for continuous operation.
2. Equipment for indoor installation is not weather-resistant.
3. Surfaces and plastic parts can also age in installation equipment, e.g. due
to UV irradiation and temperature fluctuations.
This generally does not impair functionality.
4. With permanently installed devices, the accumulation of impurities, e.g. dust,
is to be expected. Always observe the care instructions.
5. Unless explicitly stated otherwise on the device or in the technical data,
the devices are intended for installation heights of less than 5 m.
8
Publicidad
