cozze 90514 Manual De Usuario página 41

CLEANING THE BURNER ASSEMBLY
Turn the gas OFF at the control knob and disconnect the cylinder.
Remove cooling griddle.
Clean the burner with a soft brush or blow clean with compressed air and wipe with a cloth.
Clean any clogged ports with a pipe cleaner or stiff wire (such as an opened paper clip).
Inspect burner for any damage (cracks or holes). If damage is found, replace with a new
burner. Reinstall the burner, check to ensure that the gas valve orifices are correctly
positioned and secured inside the burner inlet (venturi).
In some cases, your plancha will light back because of an insect crawling inside the burner
venturi or a spider spinning its web inside the burner. This can be rectified by using a bottle
brush inserted through the burner venturi and pushing it into the burner over the burner
length. If condition persists consult your gas dealer.
SERVICING
Your gas plancha should be serviced annually by a competent registered person.
41