Naim Audio NAIT 50 Guia Del Usuario página 7

4. Set-up
Your NAIT 50 must be connected to a source (such as the NDX2 or your
turntable), but before you do, please ensure both components are in their final
positions and disconnected from mains power.
For optimum performance, use a dedicated hi-fi support – ideally Naim Fraim –
with the NAIT 50 sited above the source, as shown.
For more information, see section 5.1
Power Aerial
AC ONLY
FREQUENCY: 50/60Hz
Ensure all equipment is off before connecting.
Network
INPUT POWER: 60VA
FUSE RATING: ANTISURGE
100-120 V: T4AL.
220-240 V: T2AL.
Power Aerial
Bluetooth
AC ONLY
FREQUENCY: 50/60Hz
Network USB
INPUT POWER: 60VA
FUSE RATING: ANTISURGE
100-120 V: T4AL.
220-240 V: T2AL.
Connect the DIN interconnect cable supplied with the NDX2 to the Stream
input of the NAIT 50.
volume
Wi-Fi
Bluetooth
Contains Transmitter Modules
FCC ID: 2ACURNP800, 2ACURBLUE, 2ACURZIGEE
IC ID: 12217A-NP800, 12217A-BLUE, 12217A-ZIGEE
USB Digital Out Digital Inputs
1
4 3 2
Wi-Fi
Contains Transmitter Modules
FCC ID: 2ACURNP800, 2ACURBLUE, 2ACURZIGEE
IC ID: 12217A-NP800, 12217A-BLUE, 12217A-ZIGEE
Digital Out Digital Inputs IR Out IR Out
4 3 2 1
headphone
phono stream aux mains power
NDX 2
DESIGNED AND MADE IN ENGLAND BY
NAIM AUDIO LTD.
SOUTHAMPTON ROAD, SALISBURY
IR Out IR Out WARNING:
DISCONNECT SUPPLY CORD
BEFORE OPENING
E2378
S/No.
PLEASE READ THE MANUAL BEFORE USE
NDX 2
Wi-Fi
DESIGNED AND MADE IN ENGLAND BY
NAIM AUDIO LTD.
SOUTHAMPTON ROAD, SALISBURY
WARNING:
DISCONNECT SUPPLY CORD
BEFORE OPENING
E2378
S/No.
PLEASE READ THE MANUAL BEFORE USE
Power Supply Upgrade Analogue Outputs
Wi-Fi
L RCA R
Signal Ground
Floating
REFER TO OWNERS MANUAL
Fit NDX 2 link plug or PSU upgrade
Power Supply Upgrade Analogue Outputs
L RCA R
Signal Ground
Floating
REFER TO OWNERS MANUAL
Default
Fit NDX 2 link plug or PSU upgrade
DIN
ch.1
ch.2
-ve
Default
DIN
ch.1
ch.2
-ve
5