Naim Audio NAIT 50 Guia Del Usuario página 8

Connect speaker cables to the NAIT 50, ensuring each cable is connected to
the correct speaker and both are in phase.
For more information, see section 5.3.
Finally, connect the power cable to the NAIT 50.
Check that the volume is at minimum, then turn on the source and, lastly, the
NAIT 50.
For more information, see section 5.4
6
Power Speakers
∿
AC ONLY
Left
FUSE RATING:
ANTISURGE
INPUT POWER: 73VA
WARNING:
Do not replace supplied loudspeaker
plugs with individual 4mm plugs
NAIT 50
DESIGNED AND MADE IN THE UK BY
NAIM AUDIO, SALISBURY, SP1 2LN
110-120 V: T2AL
220-240 V: T1AL
WARNING:
FREQUENCY: 50/60Hz Disconnect power
before opening
Power Speakers
∿
AC ONLY
Left
FUSE RATING:
ANTISURGE
INPUT POWER: 73VA
WARNING:
Do not replace supplied loudspeaker
plugs with individual 4mm plugs
NAIT 50
DESIGNED AND MADE IN THE UK BY
NAIM AUDIO, SALISBURY, SP1 2LN
110-120 V: T2AL
220-240 V: T1AL
FREQUENCY: 50/60Hz WARNING:
Disconnect power
before opening
volume
headphone
Analogue Inputs Analogue Inputs
Right
L
R
Aux Stream
Instant on
On
Off
Analogue Inputs Analogue Inputs
Right
L
R
Aux Stream
Instant on
On
Off
phono stream aux mains
power
Ground
MM Phono
L
R
Ground
MM Phono
L
R