Publicidad
Idiomas disponibles
Idiomas disponibles
To check the currently set day and time, press the time/day setting button
•
(d).
IMPORTANT: the time and date settings will be saved in the device's
memory. They will be lost only in the event of turning the power switch to
the "O" position or a power loss, e.g. sudden disconnection of the power
plug from the socket.
3.3.5 Setting the temperature or canceling the setting
•
With the unit on, press the button to increase or decrease the value of a
given parameter (h or f), and the display will show the default
temperature setting.
The same buttons on the remote control (h or f) can be used to set a
•
different target temperature within the allowable range (see the technical
data table).
Use the value confirmation button (g) to save the newly set value that is
•
currently displayed.
•
To delete the previously set temperature, press the heat level button (e)
to select one of the two available heating levels (described earlier). Then
the display will show "-" and the temperature light will turn off, while the
indicator of the selected heating level will be illuminated.
IMPORTANT: after 12 hours of continuous operation in one of these two
modes, the device will turn off automatically (the fan will continue to run
for 30 seconds) and will go into standby mode.
3.3.6 Remarks on temperature settings and operation of the device
Publicidad
