Zizito SAMSON BC702F Manual De Instrucciones página 22

EN
5.1 Belt installation
● Put the baby car seat onto vehicle seat.(Figure 1)
● Pull out the car belt, let the belt tongue go through the belt passage at
near-end (Figure 2).
● Let the belt go through backside of the backrest and draw it out of the belt
passage on the other side (Figure 3,4).
Note: The car belt must go under the straps of harness system.
● Make sure the car belt go through the belt guide groove, then buckle it on
and fasten (Figure 5).
22