Publicidad
Idiomas disponibles
Idiomas disponibles
English
Owner´s manual
2. Operation
Before leaving the factory, manufacturer has already adjusted the tiller. But users should check
and adjust again before using.
1. Daily check
1.1 Check engine oil
WARNING! Engine oil should be 0.6L when it is in right condition. Engine will be
seriously damaged if oil is low.
• Make engine horizontal.
• Take out oil sticker, and clean it (Fig. 3)
• Insert oil sticker into filling hole, but don't screw on.
• Take out oil sticker, check oil level. Oil level is right when in the marked range of oil sticker.
• SAE 10W-30 oil is recommended for the usual temperature.
WARNING! Please use clean, good quality four stroke engine oil. If use dirty oil, engine
usage time may be shorter.
30
10W-30
5W-30
Temperatura ambiente
Fig. 4
Fig. 3
1.2 Check oil in gear box and tilling box.
• Set rotary tiller horizontal, screw out oil bolt.
• Usually the oil amount: gear box should be about 0.5L, tiller box should be about 1.2L.
• Recommended oil is No. 20 oil.
1.3 Place the shift lever of gear box and tilling box in neutral position.
1.4 Check air cleaner.
WARNING! Don't make engine working without air cleaner, if so, engine will be abraded.
• Add oil into air cleaner: disassemble the cover, then add about 0.1L oil number 20.
WARNING! Oil level can't over the mark.
2. Rotary tiller state adjustment
2.1 Adjustment of handle bar height (Fig. 4).
35
Publicidad
