Publicidad
Idiomas disponibles
Idiomas disponibles
reset to factory settings, the main menu will appear on the TV screen.
Select [OSD Language] and press the RIGHT / LEFT button to select
a language
Select [Country] and press the RIGHT / LEFT button to select your
home country
Select [Channel Search] and press the RIGHT or OK button to start
automatic channel search. After tuning channels is complete, you
can watch TV
Programming the remote control
The RCU33 remote control allows you to control both the terrestrial TV
receiver and the TV set. Follow the procedure below to program the
remote.
1. Open the cover on the back of the remote control and insert 2 AAA
(LR03) batteries. Make sure the polarity is correct (+/-).
2. You can program 4 keys to control your TV: TV POWER, TV-IN, VOL
+ and VOL-.
3. Place the remote controlling the TV and
RCU33 in front of each other (leave a space
of 3 to 5mm between them).
4. Press and hold the SET button for 4 seconds to enter programming
mode (the TV POWER button light will stay on and shine brighter).
5. On the remote control of the receiver and on
the TV remote, press the button you want to
program (eg VOL +), the LED will light up
quickly 3 times, the code is saved. If the LED
light up 5 times, then it's neccessary to repeate this step (some
error has occured).
6. Do the same with the TV POWER, TV-IN and VOL- buttons.
21
Publicidad
