Publicidad
Idiomas disponibles
Idiomas disponibles
10. System settings
To enter the Menu, press MENU
and select [System]. The menu
provides options for adjusting
system settings. Press UP / DOWN
to select an option and press
RIGHT / LEFT to adjust the setting.
Press EXIT to exit the Menu.
1. Parental supervision - You
can
restrict
channels that are unsuitable
for children. To restrict / lock
a channel, you need to enter
a password. The default
password is "000000".
2. Set password - Set or change
a
password
programs. Enter your old
password or the default
password
that, you will be prompted to
enter a new password. To
confirm, re-enter the new
password. After confirming,
press EXIT to exit the menu.
3. Restore
settings - Reset the decoder
to factory default settings. In
the
main
[Restore factory settings] and
press OK or RIGHT to select.
Enter your password or the
default password "000000"
26
access
for
blocked
"000000".
After
factory
default
menu,
select
and press OK to confirm. This
option will delete all preset
channels and settings.
4. Information
information about the model,
hardware and software.
11. USB
To access the Menu, press the
MENU button and select [USB].
to
The menu provides options for
playing music and photos. The
receiver supports MP3, WMA, JPG,
BMP files. The receiver only
supports USB devices with the
FAT and FAT32 file system. It does
not support the NTFS file system.
1. Multimedia - If no USB device
is connected, the warning
message "USB device not
found" will appear, otherwise
you can select music or
photos and press OK to go to
the file browser and select
the file to play.
2. Configure the display of
photos
Slide
slideshow interval to 1-8
seconds.
Slide mode: Set the slide
show effect.
Aspect Ratio: Keep original
picture aspect. [Discard]
-
View
time:
set
the
Publicidad
