Publicidad
Idiomas disponibles
Idiomas disponibles
5. OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY & OPERATION
ACTION
BEFORE OPERATION
Removing the battery pack
Installing the battery pack
Checking the battery condition
NOTE: Fig. A3 only applies for the
battery pack with battery indicator light.
Charging the battery pack
More details can be found in charger's
manual
ASSEMBLY
NOTE: The power nozzle has three
working modes: pressure cleaning
lance only, short lance only and short
lance used together with extension
lance.
Working mode 1
Attaching pressure cleaning lance to the
power nozzle
Working mode 2
Attaching short lance to the power
nozzle
Working mode 3
Attaching extension lance to the power
nozzle
Attaching short lance to the extension
lance
Attaching the Multi-spray nozzle
NOTE: When attaching, rotate the
nozzle left and right to make sure the
nozzle is fully seated into position and
gently pull it to make sure it is locked
into position securely.
Attaching the hose to the power nozzle
NOTE: After the hose is attached, check
the connection by gently pulling upon
the hose. It should not be pulled off.
OPERATION
WARNING: The supplied battery is
not waterproof. To avoid risk of
battery failure,
protect the battery from water
exposure during use. Store the tool
and battery in a dry place after use.
2 in 1: Portable Power Cleaner/
Water Sprayer
Start
NOTE: At the first use or after long-term
storage, it is recommended to attach
the tap or inject water into the hose
adapter with the machine turned on, so
as to empty the air. Do not start working
until the water goes up along the hose
FIGURE
and sprays out.
Selecting the nozzle pattern
See Fig.A1
NOTE: Choose a suitable nozzle pattern
according to your work. Spray
See Fig. A2
patterns 0
applicable for cleaning, and the spray
See Fig. A3
pattern with the symbol
suitable for watering.
WARNING: Do not shift the nozzle
pattern when the tool is powered
See Fig. A4
on.
Cleaning
WARNING: Do not connect the
machine to water supplies that
are dirty, rusty, muddy, or corrosive.
(Including window cleaning liquids,
plant foods, or fertilizers etc.)
See Fig.
NOTE: If sea water is used, the product
B1
should be rinsed and used with fresh
water after that in order to extend the
life time of the machine.
Watering
See Fig.
WARNING:Allowable pressure is
B2
checked by the following test: The
pressure is increased to 110% of the
allowable pressure, or by 1,5 Mpa for
unheated machines, and the device
See Fig.
shall operate.
B3, B4
6. ATTACHMENT OF
ACCESSORIES
See Fig. C
A number of accessories have been supplied with
this product and are required for use in different
applications. Do not attempt to use cleaning without
a lance or any accessories attached.
See Fig.
1. Soap bottle (WA4036, sold separately)
D1, D2 , D3
Soap bottle provides detergent suds for deeper
cleaning of dirt. It is used in conjunction with power
nozzle. (See Fig. J)
NOTE: Keep the machine connected to water source
when using soap bottle.
2. Brush (WA4048, sold separately)
Brush is for cleaning cars, boats, motorcycles etc. It
is used in conjunction with power nozzle. (See Fig. K)
3. Foldable water bucket (WA4015, sold separately)
, 15
, 25
and 40
are
o
o
o
o
is best
See Fig.
E1,E2,E3
See Fig. F
See Fig.
G, H
17
See Fig. I
See Fig. W
EN
Publicidad
