Etekcity EL11 Manual Del Usuario página 5

Button
Battery
Holder
Hook
Installing & Replacing
the Battery
• Use a screwdriver to loosen the screw.
• Hold the scale in one hand, and slide
out the battery holder with the other
hand.
• Push corner A on the battery holder
outward to release the battery.
• Insert the new battery under notches
B and C. Press the other side of the
battery until it clips into corner A.
• Insert the battery holder back intothe
scale.
• Use a screwdriver to tighten the screw.
Note:
• Remove the battery insulation strip
for the first use.
• Battery type: 1 x 3 V CR2032 lithium
battery.
• The LCD will display "Lo" when the
battery power is low. When this
occurs, you should replace the
battery as soon as possible.
EN
LCD
Display
Triangle
Ring
Webbing
Belt
Luggage
Handle
5