Etekcity EL11 Manual Del Usuario página 6

EN
Screw
Weighing
1. Press the POWER button to turn on
the scale.
2. Press UNIT to select the weight
unit, if needed. If the scale does not
display 0, ensure there is nostress
on the triangle ring and press the
Z/T button.
3. Strap the belt on the scale through
the luggage handle and secure the
hook of the belt on the triangle ring.
4. Lift the scale gently, making sure
it is horizontal and balanced. Wait
until the weight reading stabilizes,
flashes 3 times, and locks. The
scale will display the reading for 2
minutes, then shut off if no button is
pressed.
5. To weigh again, remove the luggage
or let the belt go slack and press
Z/T to reset the display to 0.
Reading Temperature
1. Press the POWER button to turn on
the scale. When the LCD displays 0,
press UNIT to switch to temperature
mode.
2. The LCD will display "----" and
then display the current ambient
temperature.
6
Notch C
Battery Holder
Corner A
Notch B