Whalen Lindsey ECOM-LI30BK Manual De Instrucciones página 5

1. Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a
carpeted floor or the empty carton to avoid any scratch.
2. Securely screw 8 Cam Bolts (2) into the designated small holes on the Top Panel (A) and the Side
Panels (B and C) using a Phillips screwdriver.
3. Attach the Bottom Panel (D) between the Side Panels (B and C) with four 30 mm Wood Dowels (3) and
four Cam Locks (1) (Refer to page 3 on Cam Lock system operation supplement). Tap in with a rubber
mallet, if necessary.
Assembly Instructions
B
C
C
NOTE: It is very important to use a small amount of glue on both ends of dowels.
A
B
D
1
3
1
5
3
1
1