Samson MD1 Pro Guia De Inicio Rapido página 3

Introduction
Samson's S-Max Direct Boxes combines premium sound circuitry with durable, roadworthy construction
to provide high-quality signal connection solutions for live and studio applications. The Samson MD1
Pro Professional Mono Passive Direct Box offers a variety of DI solutions for live sound and recording
applications. You can connect all kinds of audio signals like those from keyboards, drum machines,
mixers, guitars, outboard signal processors and even from the powered speaker output from an
amplifier.
Samson's STLX Faraday shielded transformer delivers an extended, flat frequency response, ultra-low
distortion, and eliminates hum and RF interference. The MD1 Pro balanced output provide a clean
signal, that is less susceptible to noise when compared to an unbalanced cable, which allows for
running longer lengths of cables. Another benefit from a balanced connection is CMR (Common Mode
Rejection), which provides cancellation of interference (hums and buzzes), while leaving the original
signal pure.
The THRU jack enables you to tap off the signal from the input and pass the signal to an amplifier
or monitor without affecting the original sound. This can eliminate the need for miking the guitar
amplifier, which in many cases is preferable, especially as more bands are using in-ear monitors.
With proper care and maintenance, your MD1 Pro will operate trouble-free for many years. Should
your direct box ever require servicing, a Return Authorization (RA) number must be obtained before
shipping your unit to Samson. Without this number, the unit will not be accepted. Please visit
www.samsontech.com/ra for an RA number prior to shipping your unit. Please retain the original
packing materials and, if possible, return the unit in its original carton. If your MD1 Pro was purchased
outside of the United States, contact your local distributor for warranty details and service information.
EN FR DE ES IT